Description of the Configuration List Contents
H/W CONFIG
S/W CONFIG
PORT SETTING
SYSTEM
PARAMETER
96
Downloaded From ManualsPrinter.com Manuals
The contents of configuration list are explained below.
Displayed Item
Model
Software Version
RAM Total
Segment Memory
Work Memory
Frame Memory
Harddisk
Option H/W
Finisher Model
PostScript
Network Scan
Key Install Key
ETHERNET
TCP/IP
SNMP
All
Description
Product name
Installed version of the printer software
Displays the amount of memory installed in the
printer.
Displays the capacity of the area where spooled print
data is stored during print processing.
Displays the capacity of the area used for running the
controller software.
Displays the capacity of the image memory (the area
in which images developed into bit maps are stored.)
Displays the model number of the hard disk on which
the input data are spooled.
Additional installed hardware device(s), such as a
folder, stacker, etc.
Model number of the finisher
Enabled software option
Disabled software option
Installation key number for the installed and enabled
software option
Ethernet settings
TCP/IP port settings
SNMP status
The left column lists the available system
parameters.
The center column lists the current system parameter
settings.
The right column lists the possible settings for each
of the system parameters.
Chapter 3 Printer Setup