Consumable Specifications - Terex TL80 Operating Instructions Manual

3.9.2 Consumable specifications

Application Code designation
acc. to Bi
Engine --
Engine EO 1540 A
Hydraulic system HYD 1040
BIO-E-HYD-HEES
Axles GO 90 LS
Lubricating points MPG-A
Brake ATF
Cooler
1) In conformity with the regulation lubricants of the Main Association of the German Building Industry e.V.
(Bi).
TL80
Stipulated consumables for Central Europe
Designation
1)
Diesel fuel
Engine oil
Hydraulic oil or
multi-grade
engine oil
Bio-degradable
hydraulic oil
based on
synthetic ester
Gearbox oil
Multi-purpose,
lithium-soap
based grease
Brake oil
Mixture of water,
additives and
glycol
Specification,
standards, quality
EN 590
ASTM D975 1-D / 2-D
SAE 15W-40
API CH-4 or CI-4
ACEA E3 / E4
HVLP 46
or
SAE 10W-40
Filling according to
customer
specifications. Brand
label on machine.
Do not mix bio-
degradable oils from
different
manufacturers.
SAE 85W-90LS
API-GL 5
K2K-30
DIN 51825
ATF
Type A Suffix A
Dexron-IID
Machine
damage
due to incorrect
coolant and mix
proportions.
Observe the
information on
the cooling
system given in
the engine
manufacturer's
Operating and
Maintenance
Manual.
Technical data 3
Remarks
Before using RME fuels
(rape oil methyl ester), it is
essential to consult your
responsible Terex dealer for
further details.
See also engine manufacturer's
instructions
The following viscosity limit
values must be kept (according
to ASTM 445)
2
at 100 °C min. 8 mm /s (cSt)
at -10 °C approx. 1,500 mm
2
/s (cSt)
The same viscosity values apply
as for mineral hydraulic oils.
When changing from
mineral to biodegradable
hydraulic oils, the tank and
hydraulic system must be
completely drained, cleaned and
flushed.
For further details before
changing oils, please consult
your responsible Terex dealer.
Alternative recommendations
SAE 90LS
SAE 80W-90LS
The antifreeze is factory-set to
approx. -25 °C.
29