Operation - Loader - Terex TL80 Operating Instructions Manual

5 Working Operation of the machine

5.2 Operation - Loader

• Switch on the work equipment (22/35).
Operation - Bucket
• Operate joystick (22/6).
Operation - Additional control circuit
• By pressing the "additional control circuit"
preselection button (22/47) once to the left or
on the symbol, the "impulse addition" function is
activated and can be engaged via the knob
switch (22/5) (e.g. open/close multi-purpose
bucket) on the coordinate lever.
• By pressing the "additional control circuit"
preselection button (22/47) to the right or
deactivating the starter preheat switch (22/50),
the additional control circuit is deactivated.
The additional control circuit must
always be
additional equipment is operated.
Continuous operation - Additional control
circuit
• By pressing the "additional control circuit"
preselection button (22/47) twice to the left or
on the symbol, the "continuous operation"
function is preselected.
• The direction of the continuous operation can
be selected and activated or deactivated via the
knob switch (22/5) on the coordinate lever.
• By pressing the "additional control circuit"
preselection button (22/47) once to the right or
deactivating the starter preheat switch (22/50),
the "continuous
deactivated.
Observe the working direction of the
attachment
direction of broom).
The additional control circuit must
always be
additional equipment is operated.
54
switched off unless
operation" function
device. (e.g. rotating
switched off unless
is
Fig. 22 Operation
TL80