Environmental Standards; Pictograms - Terex TL80 Operating Instructions Manual

1.4 Environmental standards

When operating or working on the machine the
environmental standards currently valid must be
observed at all times.
During installation, repair and maintenance tasks,
particular care must be taken that substances that
would damage the environment such as
• lubricating oil and grease
• hydraulic oil
• fuel
• coolant
• cleaning fluids containing solvents
do not seep into the ground or the sewerage
system.
These substances must be kept, transported,
collected and disposed of in suitable containers.
If above-mentioned liquids seep into the ground,
their escape must be stopped immediately and the
liquid be bound with suitable binding agents. If
necessary, the soil involved must be removed.
Absorbent materials and removed soil must be
disposed of properly. The environmental standards
currently valid must be observed.
TL80

1.5 Pictograms

The following Table explains the meaning of the
pictograms which may be attached to your
machine.
Symbol Description
Danger
In Operating Instructions:
Warning
On machine:
Caution
Note
Battery charge indicator
Preheating
Engine oil pressure
Engine oil temperature
Engine oil level
Coolant temperature
Coolant level
Air filter
Hydraulic oil
Hydraulic oil level
Hydraulic oil temperature
Hydraulic oil filter clogging
indicator
Introduction 1
3