Memory Clear; Initial Clear (Status Clear) - Sam4s ER-230 Operation And Program Manual

Memory Clear

Initial Clear (Status Clear)

CAUTION: Do not share this information with unauthorized users. Distribute the S Mode
and/or P Mode key only to those you may want to perform this function.
The initial clear function allows you to exit any register activity and return to a beginning or
cleared state. Any transaction that is in progress will be exited and totals for that transaction will not
be updated.
Here are some reasons you may want to perform an initial clear:
•
The register is in an unknown state, and you wish to exit the current program or transaction
without following normal procedures.
•
You have performed a function that includes a compulsory activity and you wish to bypass
the compulsion.
•
An initial clear may be necessary as part of servicing, or troubleshooting.
To Perform an Initial Clear:
1. Unplug the register.
2. Turn the control lock to the PGM-Mode (skip this step for ER-230).
3. Press and hold the button position where the SUBTL button is located on the default
keyboard layout.
4. While continuing to hold the SUBTL button, plug the register into a power source.
5. The message "INITIAL CLEAR OK!" prints when the initial clear is complete.
6. Press CLEAR button, the display now shows PROGRAM MODE CLOSED.
NOTE: Please see Clerk Sign-On/Sign-Off for detail when CLOSE appear on the display.
Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
Receipt Example:
DATE 01/05/2012 TUE
================================
INITIAL CLEAR OK !
================================
CLERK 00 000002
TIME 08:30
00000
Getting Started • 39