Use The Pc Utility To Convert The Image - Sam4s ER-230 Operation And Program Manual

6. Save your image as type "Monochrome Bitmap (*.bmp,*.dib)" and confirm that the size
is 10k or less. If you resized your original image, you may wish to rename when you
save, so that you preserve a copy of the original image.

Use the PC Utility to Convert the Image

1. Install the PC Utility on your PC.
2. At your PC, start the PC Utility. The Store Setting dialog box displays.
3. If you are starting the PC Utility for the first time, you must define a store name, or if a
store is already defined, you can select the store from the drop down list. After the store
is defined or selected, click Close. The PC Utility program starts.
4. Move the .bmp logos you wish to use into the store directory
(i.e. C:\ER-230PC\storename.)
5. At the PC Utility, choose Convert Logo Image from the Utility menu. The Bmp dialog
box displays.
6. Click FILE OPEN. Select the bitmap image you wish to use from the Open dialog and
click the Open command button.
7. Click the SAVE AS PRE IMG or SAVE AS POST IMG button.
8. When the image is selected, click OK. Verify that the message "Save As UserPre.Img" or
"Save As UserPost.Img" displays. If the file is too large, and cannot be loaded, the
message "File Size Error" displays.
9. Click on PreAmble Image (or PostAmble Image for available models) from the
DownProgram(PC->ECR) menu to download the image file to cash register.
10. Refer to Print Option Table, make sure Print Option #21, #22 and #30 (#21 and #27 on
ER-230) for suitable settings.
130 • Service Mode Programming
Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU