Self Test
Various components of the ER-230EJ are tested by using this program.
Memory Clear
Before you use your ER-230EJ for the first time, you must perform a memory all clear to
insure that all totals and counters are cleared and that the default program is installed. Go
to "Clearing Memory" on page "25" to complete this procedure.
SAM4S ER-230EJ Manual
1. From SERVICE MODE menu press 1 and CASH to display the SELF TEST
menu:
SELF TEST
1. BATCH TEST
2. PRINTER
3. DISPLAY
4. KEYBOARD
5. INTERFACE
6. RTC
7. BATTERY
Press the
key and the
2.
confirm.
3. Press the digit representing the test you wish to perform.
1. From SERVICE MODE menu press 2 and CASH to display the MEMORY
CLEAR screen:
Press the
key and the
confirm.
MEMORY CLEAR
1. CLEAR TOTAL
2. CLEAR GRAND
3. CLEAR PLU
4. CLEAR PRICE=0
5. EDIT COUNTERS
6. NON MOVER CLR
2. Press the
key and the
confirm.
3. To clear total, press 1 the CASH. The screen asks: ARE YOU SURE?
ARE YOU SURE?
Y=CASH N=CLEAR
4. Press the CASH for YES or the CLEAR for NO.
5. The message "ALL TOTAL CLEAR" is printed and the screen returns to the
SERVICE MODE menu.
key to select menu and press the CASH key to
key to select menu and press the CASH key to
key to select menu and press the CASH key to
Service Mode • 77