Common Tasks - Cisco 500 Series Administration Manual

Security: 802.1X Authentication

Common Tasks

Common Tasks
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
STEP 11
STEP 12
STEP 13
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide
Workflow 1: To enable 802. 1 x authentication on a port:
Click Security > 802.1X/MAC/Web Authentication > Properties.
Enable Port-based Authentication.
Select the Authentication Method .
Click Apply, and the Running Configuration file is updated.
Click Security > 802.1X/MAC/Web Authentication> Host and Session.
Select the required port and click Edit.
Set the Host Authentication mode.
Click Apply, and the Running Configuration file is updated.
Click Security > 802.1X/MAC/Web Authentication > Port Authentication.
Select a port, and click Edit.
Set the Administrative Port Control field to Auto.
Define the authentication methods.
Click Apply, and the Running Configuration file is updated.
Workflow 2: To configure traps
Click Security > 802.1X/MAC/Web Authentication > Properties.
Select the required traps.
Click Apply, and the Running Configuration file is updated.
Workflow 3: To configure 802. 1 x-based or Web-based authentication
Click Security > 802.1X/MAC/Web Authentication > Port Authentication .
Select the required port and click Edit.
Enter the fields required for the port.
The fields in this page are described in 802.1X Port Authentication.
22
494