7.3.3
Clean the burner
7.3.4
Clean the siphon
- Dismantle the siphon using the opposite of the assembly method.
Clean the siphon.
7.4 Troubleshooting
Refer to the connection instructions supplied with the control
panel..
54
- Remove the burner.
- Check the burner and, if necessary, vacuum clean without
touching it (e.g. with compressed air between 2 and 5 bars: respect
a distance of around 1 cm from the surface of the burner).
- Then replace all the parts in reverse order.
Avoid direct contact between the cables and the hot
sections of the boiler
- Fill the siphon with water.
- Re-assemble the siphon.
C 230 ECO
03/10/2012 - 300015171-001-01