Fig.136
Removing the fan
3
5
1
Fig.137
Removing the front plate, fan and
burner
7
6
7725106 - v.01 - 05062019
8.3.6
1. Remove the air inlet flue on the venturi.
2. Loosen the gland on the gas valve unit.
3. Disconnect the fan plugs (on the front and rear).
4
4. Remove the screwed-on plug from the gas valve unit.
5. Remove the ignition electrode plug from the ignition transformer.
2
AD-3001178-01
6. Remove the front plate from the heat exchanger.
7. Carefully lift the front plate, including the burner and fan, away from
the heat exchanger.
AD-3001179-01
Checking the burner and cleaning the heat exchanger
8 Maintenance
AMC Pro
39