Cleaning The Burner; Clean The Burner Area - DeDietrich C 330 ECO Installation, User And Service Manual

C 330 ECO - C 630 ECO
3
2-5 bar
min. 1cm
1
31/05/2012 - 7600532-01
1
2
4
T003488-F
2
T005044-A
7.3.5.

Cleaning the burner

1. Unscrew the nuts from the adapter: Remove the adapter.
2. Lift the burner out of the heat exchanger.
3. Check the burner and, if necessary, clean without touching it (e.g.
with compressed air between 2 and 5 bars: respect a minimum
distance of 1 cm from the surface of the burner).
Never clean the burner's surface with a brush or similar
item.
4. Carefully hoover the dirt from the inside of the burner.
5. Replace the burner if faulty or seriously damaged.
CAUTION
Do not refit the burner until the burner area, heat
exchanger, condensate collector and siphon have been
cleaned.
7.3.6.

Clean the burner area

1. Perform a visual check of the burner area.
2. Remove visible pollution with a vacuum cleaner.
7. Checking and maintenance
73