9 Maintenance
Fig.59
Removing the fan
3
5
1
Fig.60
Removing the front plate, fan and
burner
7
6
92
AMC Pro
9.3.6
1. Remove the air inlet flue on the venturi.
2. Loosen the gland on the gas valve unit.
3. Disconnect the fan plugs (on the front and rear).
4
4. Remove the screwed-on plug from the gas valve unit.
5. Remove the ignition electrode plug from the ignition transformer.
2
AD-3001178-01
6. Remove the front plate from the heat exchanger.
7. Carefully lift the front plate, including the burner and fan, away from
the heat exchanger.
AD-3001179-01
Checking the burner and cleaning the heat exchanger
7725087 - v.01 - 06062019