Snmp Groups - Siemens SCALANCE X-200 Configuration Manual

Syntax of the Command Line Interface
Table 5- 17
Command
info
traps [E | D]
settrap <entry> <IP> <E | D>
5.3.5

SNMP Groups

SNMP Configuration Groups
On this page, you create or delete user groups for device access using SNMPv3. You can
decide whether or not members of a group need to authenticate themselves, whether they
communicate with encryption and whether they have read and write permissions.
Figure 5-19
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
Agent Trap Configuration - CLI\AGENT\TRAP>
Description
Shows the trap configuration table.
Enables / disables traps.
Enables / disables the trap IP address to be
specified.
SNMP Configuration Groups
Menus in the WBM
5.3 The Agent menu
Comment
Administrator only
Administrator only
87