Siemens SCALANCE X-200 Configuration Manual page 154

Configuration via SNMP
You will find further information about the SNMP OPC server from SIMATIC NET with the
following link:
SNMP OPC server
communication/en/ie/software/network-management/snmp-opc-server/Pages/snmp-opc-
server.aspx)
SNMP OPC MIB compiler and profile files
The range of information that can be monitored by the devices with the SNMP OPC server
depends on the particular device profile. With the integrated MIB compiler, existing profiles
can be modified and new device profiles created for any SNMP-compliant device.
The MIB compiler of the SNMP OPC server requires MIB files according to the SMIv1
standard. This means that you require a modified version of the private SMIv2 MIB file of the
IE switch. The SMIv1 MIB of the IE switch and a completed device profile can be found on
the Product Support pages under the following entry ID:
22015045 (http://support.automation.siemens.com/WW/view/en/22015045)
Standard MIBs
A distinction is made between standardized MIBs defined in RFCs and private MIBs. Private
MIBs contain product-specific expansions that are not included in standard MIBs.
An X-200 ÎE switch supports the following MIBs:
● RFC 1213: MIB II (all groups except egp and transmission)
● RFC 1286, RFC 1493: Bridge MIB (dot1dBase and dot1dStp)
● Private MIBs
For information on the MIB variables of the IE switch, refer to Appendix MIBs for X-200
(Page 173) of this manual.
Access to the private MIB file of an IE switch
To access the private MIB file of an IE switch, follow the steps below:
1. Open Web Based Management.
2. Select the System -> Save & Load HTTP menu item.
3. Click the "Save Private MIB" button.
4. Follow the instructions in the window that opens.
154
(http://www.automation.siemens.com/mcms/industrial-
Configuration Manual, 03/2015, C79000-G8976-C285-06
SCALANCE X-200