Siemens SCALANCE X-200 Configuration Manual page 53

Event Log File
By clicking "Save", you can save the event table (event log file) on the local computer.
Firmware File
Name and, if applicable, directory path of the file from which you want to load the new
firmware.
Note
Compatibility of the firmware versions
If you load firmware that is older than the firmware on the device, you will have to reset the
device to the factory defaults after loading the firmware.
If you update the firmware of an IE Switch X-200, make sure that the firmware in use is
compatible with the relevant device.
If incompatible firmware is downloaded to the device, it will no longer be possible to operate
the device. In this case, compatible firmware will have to be loaded again with the boot
loader.
Firmware compatibility
Note the following restrictions relating to the compatibility of the firmware versions with the
individual devices:
Firmware version
at least X-200IRT V4.5
at least X-200IRT V4.1
at least X-200IRT V3.1
at least X-200IRT V2.1
at least X-200 V4.5
at least X-200 V4.3
at least X-200 V4.1
SSL Private Key File
Name of the file that contains the private key for SSL.
SSL Certificate File
Name of the file that contains the certificate for SSL.
Private MIB File
Here, you can save the private MIB of the IE switch X-200 in a file.
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
IE switch
X201-3P IRT PRO
XF204IRT
X202-2P IRT PRO
X204IRT PRO
X200-4P IRT
X201-3P IRT
X202-2P IRT
X208PRO
X204-2TS
XF204
XF204-2
XF206-1
XF208
Menus in the WBM
5.1 The System menu
53