Siemens SCALANCE X-200 Configuration Manual page 134

Menus in the WBM
5.4 The Switch menu
Syntax of the Command Line Interface
Table 5- 34
Command
info
add <MAC addr><port>
delete [<MAC addr>|D|S|B]
Note
With SCALANCE X-200, the MAC address table is deleted within 1s.
Note
SCALANCE X-200IRT IE switches can learn up to 4000 Ethernet addresses, the other
SCALANCE X-200 IE switches up to 8000 Ethernet addresses. The entry of a learned
Ethernet address in the address table is made by the storage system which may reduce the
actual number of addresses that can be learned.
134
Switch Forwarding Database - CLI\SWITCH\FDB>
Description
Shows the current switch forwarding database.
Adds a static MAC address.
If you enter a multicast address statically, you can
specify several ports. Separate the ports with
commas.
Example:
The command "add 01-08-00-99-99-99 1,2,3"
enters the MAC address 01-08-00-99-99-99 for
ports 1, 2 and 3 in the FDB.
Deletes an entry:
<MAC addr>
•
Deletes the entry for a MAC address.
D
•
Deletes all dynamic entries.
S
•
Deletes all static entries.
B
•
Deletes all dynamic and static entries.
Configuration Manual, 03/2015, C79000-G8976-C285-06
Comment
Administrator only
Administrator only
SCALANCE X-200