Siemens SCALANCE X-200 Configuration Manual page 75

Note
Note the following when configuring an HRP ring:
• If no HRP manager has been specified yet, the ring must be interrupted at one point. This
avoids circulating frames.
• If an MRP ring is configured, at least one device must be set to the "Automatic
Redundancy Detection" or "MRP Manager (Auto)/Client" role. The role of the redundancy
manager is adopted automatically by a device with this setting.
• If you change an MRP ring in the configuration to create an HRP ring, open the ring while
you reconfigure the devices. This avoids circulating frames.
Note
Note the following when configuring an MRP ring:
• With devices having more than 8 ports, the selection of the ring ports when using MRP is
restricted:
– With SCALANCE X216 and X224, ports 1 to 8 can be selected as MRP ring ports.
– With SCALANCE X212-2 and X212-2LD, ports 9 to 14 can be selected as MRP ring
• The default ring ports are adapted automatically if you select MRP. Make sure that the
ring ports are set correctly.
Syntax of the Command Line Interface
Table 5- 12
Command
info
mode [A | AM | C | E | D] Sets the redundancy role:
static [n-m]
isolated [n-m]
rports [n-m | n-m]
clear
redund [E | D]
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
ports.
Ring Redundancy - CLI\X200\REDUND>
Description
Displays information on the redundancy modules.
A - Auto: MRP manager or MRP/HRP client
AM - Auto: MRP manager or MRP client
C - MRP client
E - HRP manager
D - HRP client
Specifies the static (fixed) ring port.
Note:
Only for the HRP manager and HRP client roles:
Specifies the static (fixed) ring port in the range n-m.
Specifies the isolated ring port.
Note:
Only for the HRP manager and HRP client roles:
Specifies the static (fixed) ring port in the range n-m.
Specifies the two ring ports in the range n-m.
Resets all redundancy counters to the original set-
ting.
Enables / disables ring redundancy.
Menus in the WBM
5.2 The X-200 menu
Comment
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
75