Management Acl - Siemens SCALANCE X-200 Configuration Manual

5.3.15

Management ACL

Management ACL
On this page you can define rules for access to the management of your IE switch.
Note
A bad configuration may mean that you can no longer access your device. You should
therefore configure an access rule that allows access to the management before you enable
the function, see section Agent (Page 80).
Note
The configured access rules are only taken into account when the function is enabled.
Figure 5-32 Management ACL
Nr.
Shows the number of the access rule.
If you define a new access rule, a new row with a unique number is created.
IP Address
Shows the IP address to which the access rule applies.
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
Menus in the WBM
5.3 The Agent menu
111