Important Private Mib Variables - Siemens SCALANCE X-200 Configuration Manual

A.2

Important private MIB variables

Important private MIB variables
The private MIB variables of the IE Switch X-200 have the following object identifier (OID):
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
ad(4196).adProductMibs(1).simaticNet(1).iScalanceX(5).iScalanceX200(2)
Variables
snX200FaultState
snX200ReportFaultIndex
snX200ReportFaultState
snX200FaultValue
snX200RmState
snX200RmStateChanges
snBootStrapVersion
snHwVersion
snInfoSerialNr
snMacAddressBase
snSwVersion
snInfoMLFB
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
Access rights Description
Read and write. Displays the error status of the device. Possible values:
•
•
Read only Errors are assigned an ascending index according to the order in which they
occur. This 4-byte variable specifies the index.
Read only Contains the error message belonging to an index.
Read only This 4-byte long variable provides the current error statuses of the device bit-
coded.
Read only Indicates whether the redundancy manager is active or passive. Possible
values:
•
•
Read only Indicates how often the redundancy manager was switched to "active".
Read only The firmware version of the bootloader in the format major.minor.
Read only The hardware version of the system in the format major.minor.
Read only The serial number of the product.
Read only The MAC address of the X-200 IE switch.
Read only The software version of the system.
Read only The MLFB number of the device.
1 No error
2 Error
1:
The redundancy manager is passive. The IE Switch X-200 is operating as
redundancy manager and has opened the ring. In other words, the bus
with the IE Switches X-200 connected to it is operating correctly.
The "Passive" status is also shown when the redundancy manager mode
is disabled.
2:
The redundancy manager is active. The IE Switch X-200 is operating as
redundancy manager and has closed the ring. In other words, the line of
X-200 IE switches connected to it is interrupted (fault). The redundancy
manager switches through the connection between the ring ports and
thus restores a functioning bus configuration.
MIBs for X-200
A.2 Important private MIB variables
175