2.4 Service Settings
Note
•
All non-touch input calls in Automated Attendant Service will be transferred to the General
Delivery Mailbox when the Operator Service is disabled.
Operator Service For Day, Night, Lunch, and Break
Determines the settings for each operator in each time mode. Note that the extension assigned as
Operator 1 for day mode is automatically designated as the Message Manager. When operator calls
are made, calls are connected to the lowest-numbered operator that is available. To enable/disable
the operator setting for each time mode, check/uncheck it.
Note
•
Because the extension number assigned for Operator Service No. 1 in the Day Mode is for
the Message Manager, you cannot assign this extension to any other mailbox.
•
Extensions assigned as operators can be called by dialling [0], however, when setting
features such as Message Waiting Notification and Remote Call Forwarding, the extension
number (not "0") must be specified.
Value Range
Disable (unchecked), Enable (checked)
Feature Manual References
2.2.36 Operator Service
Operator Service No. 1, 2, and 3
Operator's Extension
Specifies the extension number for Operator 1, 2, and 3.
Note
•
The default extension number of Operator 1 in day mode cannot be used with the Message
Waiting Notification Lamp feature.
•
Because the extension number assigned as Day Mode Operator 1 is automatically
designated as the Message Manager, do not assign this extension number to a mailbox.
This extension number is automatically assigned to mailbox number 998.
Value Range
1–5 digits
Feature Manual References
2.2.36 Operator Service
Operator's Mailbox No.
Specifies the mailbox number for Operator 1, 2, and 3. Callers to Operator 1, 2, or 3 are prompted to
leave a message in this mailbox depending upon how the Busy Coverage or No Answer Coverage
modes are set.
82
Programming Manual