Maximum Continuous Tone Time
Specifies the length of time the VPS waits when a continuous tone is detected before it disconnects
the call.
Value Range
0 s–60 s
Maximum Cyclic Tone Time
Specifies the length of time the VPS waits when a cyclic tone is detected before it disconnects the call.
Value Range
0 s–60 s
Maximum Call Duration
Specifies the maximum duration of calls. If the VPS detects no DTMF signals for the specified amount
of time, it terminates the call.
Value Range
0 min–60 min
Transfer to Outside
These parameters determine how the VPS will transfer calls to Trunk via the following features: Call
Transfer Service, Custom Service, Personal Custom Service, Caller ID Callback.
Outside Transfer Sequence
Call Transfer to Outside Sequence
Specifies the sequence the VPS uses to transfer calls to Trunks.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialling
0–9,
, #: Dial Codes
Feature Manual References
2.2.7 Call Transfer to Outside
, # and special codes
2.5 System Parameters
Programming Manual
129