Automatic Log-In - Panasonic KX-TVM50 Programming Manual

2.1 Mailbox Settings

2.1.10 Automatic Log-in

Allows subscribers to access their mailbox directly without entering the mailbox number. Subscribers
can automatically log in either from their extensions, or from outside phones by dialling a
preprogrammed Caller ID number, DID number, or by dialling a telephone number specified to a
preprogrammed trunk. When logging in from outside phones, the Toll Saver feature is also available.
Extension
If set to "Enable", subscribers are able to access their mailbox directly without entering the mailbox
number.
Value Range
Disable, Enable
Feature Manual References
2.3.2 Automatic Log-in (APT/DPT Integration Only)
Caller ID 1, 2
Specifies the telephone number from which the subscriber can automatically be logged in from. When
Caller ID information is received that matches one of these numbers, the caller (subscriber) is
automatically logged in to the mailbox. Note that this telephone number must be unique for each
mailbox.
Value Range
Max. 20 digits
Feature Manual References
2.3.2 Automatic Log-in (APT/DPT Integration Only)
Subscriber's Manual References
5.16 Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver
DID
Specifies the DID number for Automatic Log-in. When the VPS receives this DID number from the
PBX, the caller (subscriber) is automatically logged in to the mailbox. Note that this number must be
unique for each mailbox.
Note
• Automatic Log-in via DID number is only available when the VPS is connected to one of the
following PBXs using DPT Integration.
–
–
Value Range
Max. 20 digits
56 Programming Manual
KX-TD500: Software production date code 040901 or later. (KX-TD500C: Q951AB or
higher, KX-TD500RU: Q971AB or higher, all other: Q271AD or higher)
KX-TDA series (Version 1.1 or higher)