Panasonic KX-TVM50 Programming Manual page 111

# Announcement Mode
Specifies the way of announcement for the "#" character when "English (US)" or "English (UK)" is
selected as System Guidance.
Value Range
POUND, HASH
PBX Parameters
Specifies the parameters used to program the VPS for optimal signalling and performance with the
PBX.
PBX Environment
Specifies how the VPS will initiate and control call transfers, setup outgoing calls, and control
message waiting lamps on extensions. For KX-TVM50, the procedure for verifying the correct code
sequences for non-Panasonic KX-T series PBX is to manually execute the sequences from a single
line telephone (SLT) with the PBX.
PBX Type
Specifies the type of PBX connected to the VPS.
Value Range
TDA, TD816/TD1232, TD500, TD308, TD612, TA/TE series, Other
Integration Mode
Specifies the method of integrating the VPS with the PBX.
Value Range
Inband: The PBX sends DTMF signals to the VPS to indicate the status of calls (busy, answered,
disconnect, etc.). The DTMF code for each status must be set in the Inband Signalling Parameters;
the settings of the PBX and VPS must match. If the PBX type is set to a KX-T series PBX, the Inband
Signalling Parameters will automatically default to the proper codes. This is available with any of the
following Panasonic KX-T series PBXs: TA/TE series, TD816, TD1232, TD500, TD612, and TDA
series.
DPT: The VPS communicates with the PBX via the DPT interface. This is available with any of the
following Panasonic KX-T series PBXs: TD816, TD1232, TD500, TD308, TD612, and TDA series.
APT: The VPS communicates with the PBX via the APT Interface. This is available with any of the
following Panasonic KX-T series PBXs: KX-TA/TE series.
Feature Manual References
APT Integration (KX-TVM50 only)
DPT Integration
Inband Integration (KX-TVM50 only)
*1 The value range varies depending upon Country/Area and VPS model (KX-TVM50/KX-TVM200/KX-NCV200). Consult your dealer for more
details.
2.5 System Parameters
*1
Programming Manual 111