2.4.3
Parameters
The following parameters can be specified in Parameters screen.
–
Automated Attendant
–
Rotary Telephone Service
–
Name Entry
–
Toll Saver
Automated Attendant
Specifies the parameters of functions for Automated Attendant Service.
Wait Time for First Digit
Specifies the length of time the VPS waits for the caller to dial a digit before assuming the caller is
using a rotary telephone and therefore activates Rotary Telephone Service.
Value Range
0 s–20 s
Feature Manual References
2.2.3 Automated Attendant
Menu Repeat Cycle
Specifies the number of times the VPS will play the Automated Attendant top menu if the caller does
not make a selection.
Value Range
1–5 times
Play Owner's Name during Transfer
Determines whether "Transferring you to <name>." is announced to the caller before transferring the
caller to an extension.
Value Range
Disable, Enable
Feature Manual References
2.2.3 Automated Attendant
Operator Service
These parameters specify the extension numbers and mailbox numbers for operators 1, 2, and 3, as
well as calls are treated when they are directed to and operator. Operator parameters can be set
individually for day, night, lunch, and break modes.
2.4 Service Settings
Programming Manual
81