Starting Kx-Tvm/Ncv Maintenance Console - Panasonic KX-TVM50 Programming Manual

1.2 Installing and Starting KX-TVM/NCV Maintenance Console
1.2.2

Starting KX-TVM/NCV Maintenance Console

Note
• The screenshots shown here are for reference only, and may differ from the screens
displayed on your PC.
• KX-TVM/NCV Maintenance Console uses English as the default language. See step 4 to
change the language.
12 Programming Manual
1. Click the KX-TVM/NCV Maintenance Console
shortcut icon. Its icon is shown here, on the left.
2. Select the appropriate VPS model.
3. The Set Default Parameters window is displayed the
first time you start KX-TVM/NCV Maintenance
Console. Select the TVM/NCV Type, PBX Type, and
Integration Mode. Change the default parameters
listed in the window if necessary, then click OK.
Note
• If you have already used KX-TVM/NCV
Maintenance Console to change the
Programmer Code, the Enter Programmer
Code dialogue box is displayed. Enter the
previously set Programmer Code and click
OK.
4. The main window is displayed.
Note
• You can change the display language by
clicking Utility→Set Language..., then
selecting the desired language and clicking
OK.
• To confirm or change the parameters in the
Set Default Parameters window after
changing the display language, click Utility
→Default Parameters→Set Default.