2.5 System Parameters
Maximum Extension Number Length
Set this parameter to match the maximum number of digits which the connected PBX recognises as
an extension number.
Value Range
2–5 digits
Extension Number of VPS Port 1–6 (KX-TVM50), 1–24 (KX-TVM200/KX-
NCV200)
Specifies the PBX extension number of the port connected to the VPS. When configuring the VPS
via the Auto Configuration feature, this parameter is set automatically.
Value Range
2–5 digits
Feature Manual References
2.4.1 Auto Configuration (APT/DPT Integration Only)
Operator Transfer Sequence
Specifies the sequence for transferring calls to an operator's extension.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialling
0–9,
, #: Dial Code
Extension Transfer Sequence
Specifies the sequence for transferring calls to any extension except an operator's extension.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
112
Programming Manual
, # and special codes
, # and special codes