2.1 Mailbox Settings
, : Dial Pause (default 1 s)
; : Dial Pause (default 3 s)
T: Dial Tone Detection
X: Callback Number Entry Code
0–9,
, #: Dial Codes
Feature Manual References
2.2.31 Message Waiting Notification—Device
Type of Device
Specifies the type of device telephone or beeper (pager) that will receive message notification. The
subscriber can also specify the type of device from his or her telephone.
Value Range
Telephone, Beeper
Feature Manual References
2.2.31 Message Waiting Notification—Device
No. of Retries
Specifies the number of times the VPS will try to send notification if the device is busy or if there is no
answer.
Value Range
0–3 times (E/NE: 0–4 times, NZ: 0–5 times, C: 0–9 times, Singapore/Malaysia: 0–2 times)
Feature Manual References
2.2.31 Message Waiting Notification—Device
Busy Delay Time
Specifies the time (in minutes) the VPS waits before retrying message notification when the called
device is busy.
Value Range
0 min–120 min (E/NE/Singapore/Malaysia: 2 min–120 min)
Feature Manual References
2.2.31 Message Waiting Notification—Device
No Answer Delay Time
Specifies the time (in minutes) the VPS waits before retrying message notification when the called
device does not answer.
46
Programming Manual