X: Extension Dialling
0–9,
, #: Dial Code
Alternate Extension Transfer Sequence
Specifies the sequence for transferring calls to extensions in the Alternate Extension Group.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialling
0–9,
, #: Dial Code
Feature Manual References
2.2.1 Alternate Extension Group
Reconnect Sequence on Busy
Specifies the sequence for reconnecting to the caller if the called extension is busy.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialling
0–9,
, #: Dial Code
Reconnect Sequence on No Answer
Specifies the sequence for reconnecting to the caller if the called extension does not answer.
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, # and special codes
, # and special codes
, # and special codes
2.5 System Parameters
Programming Manual
113