Panasonic KX-TVM50 Programming Manual page 139

Value Range
500 ms–20000 ms, units 100 ms
Dial Start Mode
Specifies whether dialling starts after a dial tone is detected or after the time specified in "Off-hook
Delay" has passed.
Value Range
Dial Tone Mode, Delay Mode
Off-hook Delay
Specifies the length of time that passes before dialling starts. This setting is only needed when "Dial
Start Mode" is set to "Delay Mode".
Value Range
500 ms–20000 ms, units 100 ms
Delay After Dialling Before On-hook
Specifies the length of time that the VPS waits for an answer when making an outside call. If no
answer is detected, the VPS disconnects the call.
Value Range
0 s–250 s
Record Start Beep Tone
Defines the beep tone that is heard when recording starts.
If "None" is selected, beep tones will not be heard.
Frequency
Specifies the frequency (pitch) of the beep tone.
Value Range
None, 400 Hz, 666 Hz, 1000 Hz, 1400 Hz, and 2000 Hz
Amplitude
Specifies the amplitude (volume) of the beep tone.
Value Range
-24 dBm – +6 dBm
Duration
Specifies the duration (length) of the beep tone.
2.6 Hardware (H/W) Settings
Programming Manual 139