Cable Connections; Figure 4-11: Mounting The Din Rail; Figure 4-12: Secure The Assembly To The Din Rail - IEI Technology ECW-281BB6 User Manual

ECW-281BB6 Embedded System

Figure 4-11: Mounting the DIN RAIL

Secure the DIN rail to the mounting bracket by turning the top screw clockwise.
Step 6:
This draws the lower clamp up and secures the embedded system to the DIN
rail (Figure

Figure 4-12: Secure the Assembly to the DIN Rail

4.2.9 Cable Connections

Once the system has been mounted on the wall, the following connectors can be
connected to the system.
VGA cable connector
Serial port connectors
RJ-45 connectors
4-12).Step 0:
Page 75