FX2N-64CL-M CC-Link/LT Master Block
5.
Handling Cautions
INSTALLATION PRECAUTIONS
• Use the FX
manual.
If the FX
product damage or product deterioration may occur.
• Do not directly touch the conductive area of the FX
FX
-64CL-M may malfunction or fail.
2N
• Shut down all power supplies before attaching/removing the FX
panel, otherwise, the FX
• Securely fix the FX
screws, securely tighten them within the specified torque range.
(Refer to Subsection 5.1.3)
If the screws are too loose, the module may detach from its installed position, short
circuit, or malfunction. If the screws are too tight, the screws may be damaged, which
may cause the module to detach from its installed position or short circuit.
• Install the FX
If the installation surface is not flat, an excessive force may be applied on the PCBs,
leading to nonconformity.
-64CL-M in an environment with the general specifications described in this
2N
-64CL-M is used in any other environment, electrical shock, fire, malfunction,
2N
-64CL-M may fail or malfunction.
2N
-64CL-M with DIN rail or mounting screws. When using mounting
2N
-64CL-M on to a flat surface.
2N
Handling Cautions 5
-64CL-M, otherwise, the
2N
-64CL-M to/from the
2N
5-1