Honeywell OMNI 408 Installation And Setup Manual page 36

OMNI-408/OMNI-408EU Installation and Setup Guide
NOTE: The checkmarks highlight which options are selected.
FORMAT PULSE SPEED
Digit 10 PPS 20 PPS
0
1
2
4
5
6
8
9
A
C
D
E
NOTE: UL-compatible receivers are: FBII CP220 (all formats), ADEMCO 685, Silent Knight 8520,
9000, RADIONICS.
Question 06, L3
AC Line Frequency, Split Reporting, & Pulse Type
Enter the digit for the desired message length from the table below in Location L3.
NOTE: The checkmarks highlight which options are selected.
AC LINE FREQUENCY
Digit
50 HZ 60 HZ
0
1
2
3
4
6
8
9
A
B
SPLIT REPORTING - The Split Reporting option directs all opening and closing signals to the
secondary receiver telephone number. All other conditions (alarms, troubles, restores, etc.) adhere to
the reporting route described in Question 01. If Split Reporting is selected, the secondary receiver
telephone number MUST be programmed.
If Local Alarm is desired, no other options need to be disabled (telephone number, CS
codes).
7–4
HANDSHAKE
FREQUENCY
40 PPS 1400 HZ 2300 HZ
SPLIT
REPORTING
PULSE
CS DIALER DISABLE
CS DIALER DISABLE
PARITY TYPICAL CS RECEIVER
FBII, ADEMCO, SILENT KNIGHT
FBII
FBII
FBII, SILENT KNIGHT, ADCOR, ADEMCO
FBII
FBII, RADIONICS
FBII, FRANKLIN, SESCOA, DCI, VARITECH
FBII, RADIONICS
FBII
FBII
FBII
FBII, RADIONICS
OMNI-408
OMNI-408EU Default = 3
DIALING TYPE
Touchtone
U L
Default = 1
Please consult your central
station manager to
determine the formats and
message lengths that are
accepted by the receiver.
European dialing format has
not been tested by UL.
The CS dialer disable
selection shall not be
selected for UL installations.