Cabling And Setting The Expansion Interface Card; Figure 2-75 Mounting The 2Bridb-C1 Into The Ksu; Figure 2-76 Replacing The Main-Cover - NEC SL1100 Hardware Manual
Hide thumbs
Also See for SL1100:
- Features and specifications manual (864 pages) ,
- Programming manual (650 pages) ,
- Networking manual (292 pages)
Table of Contents
Advertisement
SL1100
5.
Mount the 2BRIDB-C1 with 084M-B1/080E-B1/008E-B1/000E-B1 PCB into the KSU.
084M-B1/080E-B1/008E-B1/000E-B1 PCB
and 2BRIDB-C1 PCB
Nylon-
Spacers
6.
Replace the Main-Cover and fasten two screws.
Main-Cover
Hooks
3.4 Cabling and Setting the Expansion Interface Card
Precautions for Cabling
• Do not wire the cable with an AC cable, computer, etc.
• Do not run the cable near the high frequency generating device.
2-52
Figure 2-75 Mounting the 2BRIDB-C1 into the KSU
Figure 2-76 Replacing the Main-Cover
Screws
J1
J21
Metal-Spacers
Two screws
ISSUE 6.0
Installation
- Quick Links:
- Ksus and Optional Unit
Hide quick links:
Advertisement
Table of Contents
