Figure 2-64 Mounting The 1St Expansion Interface Card - NEC SL1100 Hardware Manual

ISSUE 6.0
4. Insert two Nylon-spacers into the specified holes, and fasten two Metal-spacers into the specified
holes. (Both Nylon and Metal spacers are provided with 080E/008E/000E/1PRIU)
If no more Expansion Interface cards are to be mounted on the 1st PCB, fasten two screws to
secure the 1st PCB on the top of the 080E/008E/000E/1PRIU.
Expansion Interface Card
(1st PCB)
Nylon-Spacers
J21
Hardware Manual

Figure 2-64 Mounting the 1st Expansion Interface Card

J1
Screws
Screw position
Both sides are
the same.
Metal-Spacers
SL1100
1st EXP.
PCB
2-45