Cabling Ip4Ww-000E-B1; Cabling And Setting Ip4Ww-4Coidb-B1; Table 2-12 Rj-61 Analog Pin-Outs (J101, J102); Figure 2-79 Connectors Of 4Coidb-B1 - NEC SL1100 Hardware Manual

ISSUE 6.0
While an Analog Telephone (port) is ringing or MW-lamp is flashing on an
Analog Phone (port), do not disconnect the phone from the port and or connect
another type of the terminal to this port.
3.4.2.1 Connectors
The following table shows the pin-outs for the RJ-61 cable connector for Analog extension
connections.
8 765 4321

3.4.3 Cabling IP4WW-000E-B1

This IP4WW-000E-B1 PCB does not have any connection for cabling.

3.4.4 Cabling and Setting IP4WW-4COIDB-B1

This IP4WW-4COIDB-B1 PCB provides two RJ-61 connections for CO lines (J2) and PFT TEL (J3).
Single Line
Telephone
Hardware Manual

Table 2-12 RJ-61 Analog Pin-Outs (J101, J102)

Pin No.
1
2
3
4
5
6
7
8
J3
PF1
T1 5
R1 4

Figure 2-79 Connectors of 4COIDB-B1

SLI 1-4 (J101), SLI 5-8 (J102): 2-Wire Analog Extension
port Connector (RJ-61)
T4 (Tip for port 4)
T3 (Tip for port 3)
T2 (Tip for port 2)
R1 (Ring for port 1)
T1 (Tip for port 1)
R2 (Ring for port 2)
R3 (Ring for port 3)
R4 (Ring for port 4)
J2
CO1-4
2-Core Cable
(Non polarity)
5 T1
4 R1
3 T2
6 R2
2 T3
7 R3
1 T4
8 R4
SL1100
Analog trunk 1
Analog trunk 2
Analog trunk 3
Analog trunk 4
2-55