Table 4-1 Status Leds; Figure 4-18 Load Button (S1) Location; Figure 4-19 Removing The Cf Card - NEC SL1100 Hardware Manual

SL1100
5. Push in and hold the LOAD button (S1 on the CPU card).
6. Turn the system power on.
7. Continue holding the LOAD button (S1) for approximately 10 seconds or until Status LED (D5)
starts flashing red.
8. Release the LOAD button (S1).
9. Wait until the Status LEDs (D2 to D5) on the CPU card has the following indications
(approximately two minutes).
LED No.
D2
D3
D4
D5
10. Turn the power off and remove the CF card from the CF slot on PZ-VM21.
11. Replace the Main-Cover and Sub-Cover.
12. Turn the system power back on.
4-12
Sub-Cover
Tab

Figure 4-18 LOAD Button (S1) Location

Table 4-1 Status LEDs

Flashing Red
Flashing Red
Flashing Red
Off
CF card

Figure 4-19 Removing the CF card

Tab
CPU card
< Front view >
Indication
CPU card
CF Slot (CN2)
PZ-VM21 PCB
ISSUE 6.0
S1
Remarks
Maintenance