SL1100
1.4.5 KSUs Inter-connection
1.
Connect the Main KSU (1228M-B) and Expansion KSU (1228ME-B) using the cables attached to
the Expansion KSU. The cable must pass two times (two rounds) through the Ferrite Core refer to
Figure 2-17 Connection of KSUs on page
KSU.)
Exp. KSU No.1 (1228ME-B)
Main KSU (1228M-B)
Exp. KSU No.2 (1228ME-B)
Use attached cables for the above inter-connection.
Because of cable length, KSU positioning is limited.
2-12
2-12. (Ferrite Core is attached with the Expansion
Pass 2 times
Ferrite Core
Pass 2 times
Ferrite Core
Figure 2-17 Connection of KSUs
EXIFE-C1 PCB
< Bottom View >
EXIFB-C1 PCB
CPU card
EXP 2
EXP 1
< Bottom View >
EXIFE-C1 PCB
< Bottom View >
ISSUE 6.0
Installation