Mounting The Expansion Interface Card; Mounting The 080E-B1/008E-B1/000E-B1/1Priu-C1 Pcbs - NEC SL1100 Hardware Manual

ISSUE 6.0
Items
IP4WW-4COIDB-B1
IP4WW-000E-B1
IP4WW-2BRIDB-C1
IP4WW-1PRIU-C1

3.3 Mounting the Expansion Interface Card

Enhancements
The 000E-B1 PCB mounted on the KSU required Main software V1.3 or higher.
DO NOT POWER ON until all installation has been completed.
Fit the optional 4COIDB-B1/2BRIDB-C1 daughter boards before installing the 084M-B1/080E-B1/008E-
B1/000E-B1 PCBs.
Set the switches on the 2BRIDB-C1 board before mounting it onto the 084M-B1/080E-B1/008E-B1/000E-
B1 PCB.

3.3.1 Mounting the 080E-B1/008E-B1/000E-B1/1PRIU-C1 PCBs

The procedure for mounting the expansion interface cards is as follows;
• Do Not Power on until all installation have been completed.
• If Expansion KSU(s) are installed, turn the power on/off in the order of
Expansion 2 KSU, Expansion 1 KSU and then Main KSU.
1. Turn off the system power and disconnect the AC cord from KSU.
Hardware Manual
List of Contents
4COIDB-B1 PCB
Nylon Spacers
4COIDB Label
Metal Spacers
Screws (with circular washer)
000E-B1 PCB (with PKG Spacer)
Nylon Spacers
Metal Spacers
Screws (with circular washer)
2BRIDB-C1 PCB
Nylon Spacers
2BRI Label
Metal Spacers
Screws (with circular washer)
1PRIU-C1 PCB (with PKG Spacer)
Nylon Spacers
Metal Spacers
Screws (with circular washer)
SL1100
QTY Note
1
2
1
1
2
1
2
2
2
1
2
1
1
2
1
2
2
2
2-43