Sd Card - NEC GT890 User Manual

SD Card

1. Insert your SD card into SD Card slot at the back of the phone. Please make sure the SD Card is
inserted with right direction on the phone as indicated on the SD card slot.
2. It will take a few seconds for the phone to prepare the connection. Then the SD Card icon
show on the status bar.
3. To access SD Card, go to ITX-3370 MENUFile ManagerSD card. Tap on it to manage your data.
Firmware upgrade via SD card

For users that could not use remote upgrade or could not access the phone's Web GUI to upload firmware,
upgrading via external SD card is an alternative. Follow the steps below to upgrade ITX-3370 via SD card.
1. Download the firmware file to PC and save it in SD card.
2. Check off the Disable SD card feature under Web GUISystem SettingsPreferences
Peripherals interface ManagementDisable SD card.
3. Insert the SD card to ITX-3370.
4. ITX-3370 pops up the "Upgrade prompt" window on the screen.
5. Press "OK", it will go into the upgrading process.
6. Power cycle the ITX-3370 and the 5 LCD keys on the bottom of the screen will light up.
7. The ITX-3370 will start upgrading and display the upgrading process in the screen.
8. Wait until the upgrading is done.
9. The ITX-3370 will reboot itself.
10. Check the firmware status and remove the SD card.
Note:
SD Card is disable on the default setting.
For enable the SD card, check off the Disable SD card feature under Web GUISystem
SettingsPreferencesPeripherals interface ManagementDisable SD card.
104
will