Figure 2-32 Connecting The Battery Cables; Figure 2-33 Installation Of Battery Tray Cover - NEC SL1100 Hardware Manual

ISSUE 6.0
8. Connect the battery cables.
Battery Connection Cable (black)
Battery Connection
Cable (red)
Incorrect installation of batteries may damage the Fuse Unit or cause
possible fire.
9. Insert Battery Connection Cable into the Cable guides as shown in the next diagram.
10. Install the Battery tray cover aligning the three tabs and tightening the two screws.
Battery
Connection Cable
• Do not pull the Battery connection cable strongly.
• Be careful not to catch the Battery Connection Cable when installing the
Battery tray cover.
Write down the year and month of the next battery replacement in the label on Front cover.
Hardware Manual
Terminal
(black)
Terminal
(red)
< Front View >

Figure 2-32 Connecting the Battery Cables

Three tabs

Figure 2-33 Installation of Battery Tray Cover

Terminal
(black)
Terminal
(red)
Battery Connection
Cable (blue)
Two batteries
Two screws
(with stopper)
Battery tray cover
Cable guides
SL1100
2-25