Mounting The 2Bridb Pcb; Figure 2-73 Plastic Knockouts On 084M-B1/080E-B1/008E-B1/000E-B1; Figure 2-74 Installing The 2Bridb-C1 - NEC SL1100 Hardware Manual
Hide thumbs
Also See for SL1100:
- Features and specifications manual (864 pages) ,
- Programming manual (650 pages) ,
- Networking manual (292 pages)
Table of Contents
Advertisement
SL1100
3.3.3 Mounting the 2BRIDB PCB
Set the switches on the 2BRIDB-C1 PCB before mounting onto the 084M-
B1/080E-B1/008E-B1/000E-B1 PCB, refer to the
page
2-57.
1.
Cut and remove specified Plastic Knockouts on the 084M-B1/080E-B1/008E-B1/000E-B1 PCB.
Plastic
Knockout
Plastic
Knockout
Figure 2-73 Plastic Knockouts on 084M-B1/080E-B1/008E-B1/000E-B1
2.
Insert two Nylon-spacers into the specified holes. Using supplied screw, fasten Metal Spacer to
2BRIDB-C1 PCB.
3.
Mount the 2BRIDB-C1 PCB onto the 084M-B1/080E-B1/008E-B1/000E-B1 PCB using two Nylon-
spacers and one screw. (Refer to
2-50
084M-B1
080E-B1/008E-B1
Figure 2-74 Installing the 2BRIDB-C1 on page
Switch Setting on
Plastic
Knockouts
ISSUE 6.0
000E-B1
2-51)
Installation
- Quick Links:
- Ksus and Optional Unit
Hide quick links:
Advertisement
Table of Contents
