Connecting Peripheral Devices; Connecting Peripheral Devices; Drive Models 2O0028 To 2O0248 And 4O0011 To 4O0590 - YASKAWA U1000 Technical Manual

8.3 Connecting Peripheral Devices

8.3

Connecting Peripheral Devices

Figure 8.1 and Figure 8.2
Refer to the specific manual for the devices shown below for installation instructions.
Note: If the drive is set to trigger a fault output when the fault restart function is activated (L5-02 = 1), then a sequence to interrupt power when
a fault occurs will turn off the power to the drive while the drive attempts to restart. The default setting for L5-02 is 0 (fault output active
during restart).
u

Drive Models 2o0028 to 2o0248 and 4o0011 to 4o0590

Power
Supply
Line
Breaker
(MCCB)
or
Leakage
Breaker
Magnetic
Contactor
(MC)
Zero-phase
Reactor
460
illustrate how to configure the drive and motor to operate with various peripheral devices.
Surge
Absorber
Momentary
Power Loss
Recovery Unit
N B1/P
p1 n1 R/L1 S/L2 T/L3
Figure 8.1 Connecting Peripheral Devices to Drive Model 2o0028
LED Operator/LCD Operator
USB Cable
USB
(Type-AB)
Copy unit
USB Cable
(Type-AB, sold separately)
U1000
Ground
U/T1 V/T2 W/T3
Magnetic
Contactor
(switches to
line power)
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual
Engineering Software Tools
DriveWizard
DriveWorksEZ
PC
Motor
Ground