Connecting Peripheral Devices - YASKAWA U1000 iQpump MATRIX Drive User Manual

7.3

Connecting Peripheral Devices

Figure 7.1 illustrates how to configure the drive and motor to operate with various peripheral devices.
Refer to the specific manual for the devices shown below for installation instructions.
Note: If the drive is set to trigger a fault output when the fault restart function is activated (L5-02 = 1), then a sequence to interrupt power when
a fault occurs will turn off the power to the drive while the drive attempts to restart. The default setting for L5-02 is 0 (fault output active
during restart).
u
Drive Models 2o0028 to 2o0248 and 4o0011 to 4o0414
Power
Supply
Line
Breaker
(MCCB)
or
Leakage
Breaker
Magnetic
Contactor
(MC)
Momentary
Power Loss
Recovery Unit
Zero-phase
Reactor
YASKAWA TOEPYAIUPW01A YASKAWA AC Drive - U1000 iQpump Matrix Drive User Manual
Surge
Absorber
Drive
Ground
N B1/P
p1 n1 R/L1 S/L2 T/L3
Figure 7.1 Connecting Peripheral Devices to Drive Model 2o0028
7.3 Connecting Peripheral Devices
HOA Keypad
USB Cable
USB
(Type-AB)
Copy unit
USB Cable
(Type-AB, sold separately)
U/T1 V/T2 W/T3
Magnetic
Contactor
(switches to
line power) Ground
Engineering Software Tools
DriveWizard
PC
Motor
7
255