Switching On And Off The Rear Burner; Adjusting To The Pilot Only Setting; To Turn Off Using Remote; To Turn Off Using Rocker Switch - Valor 500FS Installer And Owner Manual

++ Button
Please note pressing the ++ button on the 500RC unit
operates no command function.
This is used on the Inspire 600RC and 800RC models which
have a second rear burner to control.

Adjusting to the pilot only setting.

When the burner is operating press and hold the DOWN arrow until the burner
flame/flames extinguishes. The pilot can be seen through the cutout at the middle
front of the burner openeing. To turn the main burner on again simply press and hold
the UP arrow button.
To turn off.
To turn the fire off press the 'OFF' button. After turning the fire
off the remote control valve will return to its starting position.
For this reason it is important to leave the appliance alone for
a period of one (1) minute before attempting to relight.
If the appliance will not operate, follow the instructions "To Turn Off" below and call
the Valor Technical Helpline 0844 8711 565.
©
Page 52
GDC Group Ltd. SEPT 2016