Switching On And Off The Rear Burner; Adjusting To The Pilot Only Setting; To Turn Off Using Remote; To Turn Off Using Rocker Switch - Valor Inspire 1000FS Installer And Owner Manual

Swiching ON and OFF the rear burner
Press and hold the ++ button until the rear burner flame
ignites. To turn the rear burner OFF again simply press and
hold the ++ button till it extinguishes.

Adjusting to the pilot only setting.

When the burner is operating press and hold the DOWN arrow until the burner
flame/flames extinguishes. The pilot can be seen through the cutout at the middle
front of the burner openeing. To turn the main burner on again simply press and hold
the UP arrow button.
To turn off.
To turn the fire off press the 'OFF' button. After turning the fire
off the remote control valve will return to its starting position.
For this reason it is important to leave the appliance alone for
a period of one (1) minute before attempting to relight.
To turn off using the Rocker switch.
To turn the fire off press the 'ON/OFF' switch to the 'O' (Off position), rocker switch
only fitted onto 600RC & 800RC models.
If the appliance will not operate, follow the instructions "To Turn Off" below and call
the Valor Technical Helpline 0844 8711 565.
©
Page 52
GDC Group Ltd. NOV 2017