Mode Sense (6)
The 6-byte Mode Sense command (1Ah) enables the library to report its operating
mode parameters to the initiator.
The initiator can request one page or all pages of the mode parameters.
■
The initiator can use the Mode Select command to change the values of certain
■
mode parameters.
Before issuing any Mode Select commands, an initiator should issue a Mode
■
Sense command with the Page Control field set to 01h, and the Page Code field
set to 3Fh to determine which:
Pages are supported
■
Parameters within the pages are changeable
■
Supported length of each page
■
TABLE 6-35 Mode Sense Command
Byte
7
0
1
2
Page Control
3
4
5
96122 • Revision: F
6
5
Operation Code (1Ah)
Ignored
SubPage Code (00h)
Allocation Length
Bit
4
3
Rsvd
DBD
Page Code
Control Byte
Chapter 6 SCSI Commands 127
Mode Sense (6)
2
1
0
Reserved (0)