Reserve (10)
Other Commands and Reservations
Unit and element reservations are released or canceled by:
A Release command from the initiator that owns the reservation (original
■
initiator or the third party)
A Task Management reset:
■
Bus Device Reset Message
■
Target Reset
■
LUN Reset
■
An interface reset
■
A power-on reset of the library
■
If the library is reserved as a unit, the library processes only the following
commands from another initiator:
Prevent/Allow Medium Removal with Prevent bits set to 0
■
Inquiry
■
Release
■
Report LUNs
■
Request Sense
■
Log Sense
■
Read Element Status with the CurData bit set to 1 (currently not supported)
■
All other commands result in a Reservation Conflict status (18h).
226 SL500: Interface Reference Manual • July 2008
Revision: F • 96122