Diagnostic And Cleaning Cartridge Locations - Sun Microsystems storagetek sl500 Reference Manual

TABLE A-2
Base module
Base module + 1 drive
expansion module
Base module + 2 drive
expansion modules
Base module + 3 drive
expansion modules
Base module + 4 drive
expansion modules
Note: When the CAP slots are used for storage slots, add the number in that
column to the number in the total slots column.
Diagnostic and Cleaning Cartridge
Locations
A total of 7 cells (base unit only) or 9 cells (with expansion modules) may contain
diagnostic and cleaning cartridges. The customer may elect to not set any reserved
cells, in which case these are just normal storage cells.
Locations of these cells are within the arrays positioned on Column 1, the front
most column on the left side of the library in the Base Module.
Since the safety barrier may be moved during a maintenance activity, online
customer access to these cell locations would not be allowed; this is why the area is
reserved for non-data cartridges.
96122 • Revision: F
Slot Counts for Different Configurations
43
57
57
57
57

Diagnostic and Cleaning Cartridge Locations

43 7
77 134 9
161 218 9
245 302 9
329 386 9
Appendix A Cell Maps 239
2
10 6
20 10
30 14
40 18