Position to Element
The Position to Element command (2Bh) is supported only for compatibility with
existing applications. It causes the hand to be positioned to the specified
destination element address.
TABLE 6-68 Position to Element Command
Byte
7
0
1
Ignored
2
(MSB)
to
3
4
(MSB)
to
5
6
7
8
9
Position to Element Command Definitions:
This field defines the hand element to use and should contain the element address
Transport Element
Address
of the hand or 00h (0d). A value of 00h (0d) indicates use of the default hand.
Destination
This field defines the address of the element where the hand is to be positioned.
Element Address
Invert
The library does not support this function and requires a value of 0.
96122 • Revision: F
6
5
4
Operation Code (2Bh)
Transport Element Address
Destination Element Address
Reserved (00h)
Reserved (00h)
Reserved (00h)
Control Byte (00h)
Bit
3
2
Reserved (00h)
Chapter 6 SCSI Commands 179
Position to Element
1
0
(LSB)
(LSB)
Invert
(0)