Unpacking Instructions For The Cryostat Cm1860/1860 Uv - Leica CM1860 Instructions For Use Manual

4. Setting up the Instrument
4.2

Unpacking instructions for the cryostat CM1860/1860 UV

Fig. 4
2
1
Leica CM1860 /CM1860UV – Cryostat
• W hen the instrument is delivered, check the tilt indicators on the pa-
ckaging.
• I f the arrowhead is blue, the shipment was transported laying flat, was
tilted at too great an angle or fell over during transport. Note this on the
shipping documents and check the shipment for possible damage.
• Two persons are required to unpack the instrument!
• I nstrument figures and pictures are only to be used as examples to ex-
plain the unpacking procedure.
• To remove the strips (1,
required.
• Stand next to the crate and cut the strips at the location shown (see ar-
rows in Fig. 5).
• Lift the outer carton ring (2,
• Carefully remove the adhesive tape (3,
anchors (4, Fig. 6) on both sides of the instrument and remove them.
• Pull the dust cover (5,
• Remove the two white and the two blue transport anchors (6,
which protect the chamber window.
• Remove all accessories (7,
Caution when re-
moving the strips!
There is a risk of in-
jury when opening
them (the strip has
sharp edges and is
under tension)!
Fig. 5
Fig. 5), suitable shears and protective gloves are
Fig. 5) upwards and out.
Fig.
Fig. 6) from the instrument.
Fig. 6).
4
3
5
7
6) holding the two transport
6
4
8
Fig. 6),
Fig. 6
19